AMU300 - 300W fm transmitter kits Amplifier Module 88MHz-108MHz Input 2W output 300W
300 W – FM Amplifier Module
Designed for fm radio transmitter ,
this amplifier incorporates micro strip technology
and MOSFET transistor to enhance ruggedness
and reliability.
SWR SENSOR / SWR PROTECTION
/ LPF ON BOARD
Designed for fm radio transmitter ,
this amplifier incorporates micro strip technology
and MOSFET transistor to enhance ruggedness
and reliability.
SWR SENSOR / SWR PROTECTION
/ LPF ON BOARD
• 87.5 ÷ 108 MHz
• 48 Volts and 24V required
• Input / Output 50 Ω
• Gain: 18 dB typ 19.5 db max
• Class B Id=2mA
• Low pass filter on board
• SWR sensor on board
• Devices: MRF151 or equivalent + MRF314 (input section)
• 48 Volts and 24V required
• Input / Output 50 Ω
• Gain: 18 dB typ 19.5 db max
• Class B Id=2mA
• Low pass filter on board
• SWR sensor on board
• Devices: MRF151 or equivalent + MRF314 (input section)
Dimension (L x W x H): 125 x 50 x 15mm [5” x 2” x 0.6”]
This picture is a mere example, it does not bind the
provided product
This picture is a mere example, it does not bind the
provided product
ABSOLUTE MAXIMUM RATINGS (Device Flange T = 70 °C)
Vdc Drain Voltage Supply:52V
Idc Supply Current:12A
Vswr Load Mismatch (all phase angles, Tc=40°C, Id=4A):3:1 Vswr
Pin Input RF Power: 2W
Tstg Storage Temperature Range : -40 to +80 °C
Tc Operating Temperature: +70 °C
Idc Supply Current:12A
Vswr Load Mismatch (all phase angles, Tc=40°C, Id=4A):3:1 Vswr
Pin Input RF Power: 2W
Tstg Storage Temperature Range : -40 to +80 °C
Tc Operating Temperature: +70 °C
ELECTRICAL SPECIFICATIONS (Base Plate T = 45 °C, 50Ω loaded, Vd = 28 V)
Operating Frequency Range: 86 ~ 109 MHz
Fundamental Output Power: 280 ~ 320 W
Input Power: 1~ 2W
Power Gain (300W output): 17.5 ~ 19db
Drain Efficiency (Load 50Ω): 60 ~ 65 %
Input VSWR: 1.5:1 1.7:1 Vswr
F2 Second Harmonic: -70 ~ -80 dbc
F3 Third Harmonic : -60 ~ -65 dbc
Fundamental Output Power: 280 ~ 320 W
Input Power: 1~ 2W
Power Gain (300W output): 17.5 ~ 19db
Drain Efficiency (Load 50Ω): 60 ~ 65 %
Input VSWR: 1.5:1 1.7:1 Vswr
F2 Second Harmonic: -70 ~ -80 dbc
F3 Third Harmonic : -60 ~ -65 dbc
ELECTRICAL CONNECTIONS
Warning – Operating without antenna or dummy load (50ohm) can permanently damage to the long range fm transmitter.
Warning – Check the output connection before applying DC voltage to the module.
Warning – Operating without antenna or dummy load (50ohm) can permanently damage to the long range fm transmitter.
Warning – Check the output connection before applying DC voltage to the module.
没有评论:
发表评论